AutoDrill
1221 US Hwy 22
Lebanon, NJ  08833
Ph. 800-871-5022
Fax: 908-542-0242

Selection of Adjustable Multiple Spindle Heads

Adjustable Multi-Spindle Heads are available in four layouts. These layouts cover many of the requirements to make closely spaced holes. The common requirement for all adjustable multiple spindle heads is that the pattern be equally spaced from the head's input centerline. This is not to say that other spacings are not possible. It is to say that if you expect the pattern to be centered on the input centerline of the head the pattern must be symmetrical about this centerline. Go to the PAGE showing how to adjust the adjustable multi-spindle heads to view an example.

ADJUSTABLE TWIN SPINDLE DRILL HEAD

	MODEL	A (MIN. C-C)		B (MAX. C-C)		C (MAX. DIA.)
		IN	MM	IN	MM	IN	MM
	2-5	.532	13.5	2.89	73.5	3/16	5
	2-7	.71	18	3.54	90	1/4	7
	2-10	.867	22	4.17	106	3/8	10
	2-16	1.42	36	6.45	164	5/8	16

ADJUSTABLE IN-LINE THREE SPINDLE DRILL HEAD

	MODEL	A (MIN. C-C)		B (MAX. C-C)		C (MAX. DIA.)
		IN	MM	IN	MM	IN	MM
	3L-5	.552	14	1.73	44	3/16	5
	3L-7	.788	20	2.20	56	1/4	7
	3L-10	.867	22	2.52	64	3/8	10
	3L-16	1.42	36	3.93	100	5/8	16

ADJUSTABLE BOLT CIRCLE THREE SPINDLE DRILL HEAD

	MODEL	A (MIN. BCD)		B (MAX. BCD)		C (MAX. DIA.)
		IN	MM	IN	MM	IN	MM
	3C-5	.867	22	3.22	82	3/16	5
	3C-7	1.10	28	3.93	100	1/4	7
	3C-10	1.26	32	4.56	116	3/8	10
	3C-16	2.04	52	7.08	180	5/8	16

ADJUSTABLE BOLT CIRCLE FOUR SPINDLE DRILL HEAD

	MODEL	A (MIN. BCD)		B (MAX. BCD)		C (MAX. DIA.)
		IN	MM	IN	MM	IN	MM
	4C-5	1.33	34	3.70	94	3/16	5
	4C-7	1.65	42	4.48	114	1/4	7
	4C-10	1.89	48	5.19	132	3/8	10
	4C-16	3.07	78	8.11	206	5/8	16