AutoDrill
1221 US Hwy 22
Lebanon, NJ  08833
Ph. 800-871-5022
Fax: 908-542-0242


Send E-Mail to AutoDrill
MultiSpindle Head Products
Multiple Spindle Head Applications
Multiple Spindle Head Accessories
Adjustable Multiple Spindle Head Selection
Multiple Spindle Application Sheet
MultiSpindle Head Literature
Multiple Spindle Head CAD Drawings
Request Information for Multiple Spindle Heads

Multi-Spindle Drill Home
Site Map


Multiple Spindle Head Accessories

Collets for Multi Spindle Heads
Multi Spindle Head ER Collet

Our ER collets are known for accuracy, holding power and universal availability. Their short length is important because the spindle length can be shorter and runout increases with tool overhang.

Collet
Group
Clamping Range & Available Sizes
Metric (mm) Inch
ER8 1.0-5.0 (.5 Increments)  
ER11 1.0-7.0 (.5 Increments) 1/16-1/4 (1/32 increments)
ER16 1.0-10.0 (.5 or 1.0 Increments) 1/16-13/32 (1/32 increments)
ER20 2.0-13.0 (.5 or 1.0 Increments) 1/16-1/2 (1/32 increments)
ER25 2.0-16.0 (.5 or 1.0 Increments) 1/16-5/8 (1/32 increments)




Tools for Multiple Spindle Heads
Multi-Spindle Head Tools

Special tools necessary for the operation of our Multiple Spindle Heads are provided with each head purchased. Additional or spare tools are available from stock.



Setup Fixtures for Multiple Spindle Heads

A setup fixture is the easiest and accurate way to set the spindle pattern of an Adjustable Multi-Spindle Head. Custom fixtures can be provided for any of our Multiple Spindle Heads. Click HERE to view the adjustment method and pitfalls to manual adjustment of multiple spindle heads.

Copyright ©2005 Drill-Spindle-Heads.com